Model assessment · OASE

OASE EcoFlow 150 Internal Aquarium Filter review

The 150 US size has a 40-US-gallon model-table ceiling, 145 GPH maximum flow label and 0.52 L total filter volume in a 11.6-inch body.

Sources checked 2026-10-30 · Our editorial approach

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

OASE EcoFlow 150 internal aquarium filter body, exact US SKU 94116 page association
Official OASE image associated with EcoFlow 150 US SKU 94116 on the exact product page; the cutout shows the filter body, not a size badge. OASE official product image
A useful fit for

Consider the EcoFlow 150 when the 11.6-inch internal body can be placed without blocking livestock or service access and its maker-listed 40-gallon model ceiling is relevant to a broader aquarium-fit assessment.

The main tradeoff

The exact table gives a 40-US-gallon maximum, while generic family copy says 50 gallons; the model page supplies no lower interval endpoint. At 8 W and 0.52 L labeled filter volume, the 150 differs materially from the smaller 4.5 W EcoFlow units, but the 0.52 L is not basket capacity.

Your needs, this model

Does it fit your priorities?

What aquarium-size claim is attached to EcoFlow 150 US SKU 94116?

OASE's exact 150 table says up to 40 US gallons and separately lists 150 L. The page does not state a lower endpoint. Its generic family paragraph also says up to 50 gallons for EcoFlow filters, so use the exact 150 model table for the model-specific ceiling and retain the generic-copy conflict.

Explore this need in the finder →
How does EcoFlow 150 differ from the 100 size in listed output and body fit?

The model tables list 150 at 145 GPH, 8 W, 11.6 inches high and 0.52 L filter volume, compared with 100 at 120 GPH, 4.5 W, 9.8 inches high and 0.39 L. These are maker-listed maximum output and filter volume, not independently measured aquarium circulation or media-basket capacity.

Explore this need in the finder →
Does EcoFlow 150 publish a media-basket volume?

No. Its exact page gives 0.52 L of total filter volume and describes mechanical foam and BioPearls, but does not call 0.52 L a basket or media-holding measurement. The finder leaves the minimum-basket field unknown rather than converting a total volume.

Explore this need in the finder →

OASE's exact US EcoFlow 150 page identifies SKU 94116 and lists the filter for aquariums up to 40 US gallons, with 150 L as a separate capacity label. It gives maximum flow as 145 GPH / 550 L/h, power as 8 W at 120 V / 60 Hz, body dimensions of 3.7 × 2.6 × 11.6 inches and a 0.52 L filter-volume figure. The model is one of four distinct internal-filter sizes in the current US EcoFlow family; the specifications are not interchangeable with the 60, 100 or 200. The 150's length and power step are practical considerations, not evidence of measured water turnover or suitability for a particular animal load.

Plan for the body's length, not just its rating

The 150 avoids the separate canister footprint and below-tank plumbing, but its nearly 12-inch housing occupies a substantial vertical column inside the aquarium. Check clearance above and below the intended mount, outlet direction near the surface and the route for lifting the chamber during maintenance. OASE describes a secure mounting bracket with suction cups and magnetic catches so the filter unit can be removed while the pump remains in place. That can separate routine module handling from pump repositioning, but a crowded aquarium may still make service awkward.

Compare the exact variants rather than assuming every difference is just a model-number step. The 100 is 9.8 inches high and draws 4.5 W in the maker table; the 150 rises to 11.6 inches and 8 W. Its maximum-flow label increases from the 100's 120 GPH to 145 GPH, while its 0.52 L total filter volume is still not a reported basket capacity. The 200 is 13.4 inches high, while the shorter 60 is only 8 inches. That progression matters when the aquarium's internal layout is tight or the filter needs to be hidden among plants.

Flow adjustment is not a stocking rating

The exact page describes adjustable flow rate and direction, a top outlet and spray bar, and a Venturi option for additional surface oxygenation. These features provide ways to direct the return, but the page does not report the resulting circulation through a specific tank or media arrangement. Its 145 GPH / 550 L/h value is the maker's maximum listed output; it is not a test result or guarantee that the aquarium will experience that flow. Where livestock needs calmer water, installation and outlet direction still need to be chosen carefully.

OASE describes mechanical filtration through 20-ppi foam and biological filtration using BioPearls. The removable modules and upper chamber are designed for service and customization. The displayed 0.52 L is explicitly labeled filter volume, however, not a media-basket measurement. Do not convert the total volume or media descriptions into a basket-litre claim. The maker does not publish a fish-count, unusually high-waste or maintenance-frequency rating on this page.

One source conflict affects the capacity story

The individual US specification table lists the 150 up to 40 gallons / 150 L, but the same product page's generic EcoFlow-family paragraph says the filters are suitable up to 50 gallons / 200 L. These statements cannot both be used as this exact SKU's model-level ceiling without explanation. This review retains the 40-gallon model-specific table and flags the broader family copy rather than silently assigning the 200's limit to the 150. The exact table still gives only an upper boundary: no minimum operating volume appears, so the finder does not certify the 150 at any particular entered tank size from the maximum alone.

The 150's 40-gallon label is not a stocking or waste-load guideline. A smaller aquarium with different livestock, feeding and water movement is not described by that number. The paired 150 L figure should stay as printed rather than used to manufacture a converted interval.

Who should keep it on a shortlist?

It is a candidate for someone who wants an internal US model with adjustable outlet direction and can accommodate its 11.6-inch body, pump access and stated 8-W draw. Before purchase, verify that the offer is SKU 94116, check the current manual and actual package, and confirm the outlet can be positioned without creating a problem for inhabitants or the aquascape. If a complete numeric tank range, measured circulation, known basket volume or explicit high-waste support is essential, these sources leave those fields unknown. This is a desk-researched comparison of manufacturer material, not hands-on testing.

Primary references: OASE's exact EcoFlow 150 US SKU 94116 page, the US Internal Filters listing and exact same-family pages for 60, 100 and 200. Sources checked 2026-10-30; no aquarium tests were performed.

Key specifications

Key details at a glance

Published range upper bound40 US gal
Filter volume (manufacturer label)0.52 L
Power draw at 120 V / 60 Hz8 W
Manufacturer-supported water typesfreshwater / saltwater
US manufacturer item number94116
Body length3.7 in
Body width2.6 in
Body height11.6 in
Manufacturer-listed outlet choicesOASE describes adjustable flow direction and rate, a top outlet/nozzle and integrated spray-bar choice, plus a Venturi nozzle attachment; use one selected outlet arrangement at a time.
Manufacturer-listed included media20 ppi mechanical filter foam / BioPearls for biological media
Maximum listed flow rate145 US GPH
Maximum listed flow rate (paired maker value)550 LPH
Adjustable flow controlYes
Manufacturer aquarium-size claimThe exact US model table lists up to 40 US gal and 150 L, without a lower endpoint. The same exact page also carries generic family copy saying EcoFlow filters are suitable up to 50 gal / 200 L; preserve that discrepancy instead of replacing the exact model table.

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

Start with your tank and installation constraints

Compare supported tank-volume intervals, external versus internal arrangements, installation space and media needs. An upper-only capacity claim cannot establish a complete volume fit, and the finder cannot infer your fish load.

In this review

Questions to consider for this model

Read the matching requirement, its tradeoffs and the other reviewed options.

More matching requirements
Combine my requirements →